Quick Tips To Fix a Broken Laptop Screen?

We are frequently asked; Is it possible to fix a broken laptop screen? Whether you can repair it or not depends on the type of damage. It is still obscure. Well, let us explain.

You don’t need to replace the laptop screen immediately if it is cracked. Screen crack or damage can happen for multiple reasons, which we’ll discuss later. On the contrary, if the damage is physical or external, there is no way except to replace it.

However, this article will demonstrate how to fix a damaged laptop screen [Both External & Internal] without professionals’ help. So, without any further ado, let’s get started.

What Are The Possible Reasons for a Broken Laptop Screen

When your laptop gets damaged externally, it usually occurs due to physical damage. You may have dropped the laptop or dropped something else on it accidentally. Sometimes, it can also be broken by sand between it and the keyboard.  We have given some other reasons here that can cause laptop screens to be dysfunctional or broken. These include

1. Cable & Connector Problems
2. Outdated Driver
3. Screen Burn
4. Stuck Pixel
5. Malfunctioning Backlight

 

How to Fix a Broken Laptop Screen [For Internal Problem]

It is too easy to fix a laptop screen if the damage is internal. We have provided the possible solution to help you repair your laptop’s internal screen crack with ease.

Don’t Miss:

• How to Reset Dell Laptop Password in 5 Ways If You Forgot It
• How to Buy a New Laptop and Save Money Doing It
• How to Get Pictures of a Phone That Won’t Turn On

Step-1: Restart Your Laptop

If your laptop screen cracked due to an operating system issue, or other software conflicts, it could be resolved by simply restarting the laptop. It should be the first thing you try and is also simple. Wait until the laptop is opened, then check if it is ok. If not, then follow the below steps.

Step-2:  Turn off The Laptop

To fix the internal crack of your laptop screen, turn it off and disconnect the charger if it is connected. After that, remove the battery carefully.

Step-3: Extract The Bezels

In the third step, you have to remove the screen bezel. As the laptop bezels are made of plastic, carefully remove them using an innovative tool like a needle or pin.

Step-4: Remove The Screws

Four or eight screws stretch out the laptop screen and must be removed. You can use a screwdriver to remove them.

Step-5: Pull Out The Screen

Once all the screws are removed, gently remove the screen from the laptop, and the inverter board will appear below the screen.

 

Step-6: Inspect the Cables

In this step, you must examine all the cables connected to the inverter board. There are two cables on the inverter board. One is a video cable, the other is an inverter cable, and both are connected with the white connector. If any of the cables are disconnected, that means the problem has occurred due to the disconnection.

Step-7: Connect The Disconnected Cable

Once you have figured out the faulty cable, it is time to connect it. Properly restoring the disconnected cable will help to fix the internal crack damage. Once you are done, place the screw and bezels. That’s It.

How To Replace Broken Laptop Screen [Step-By Step]

If your screen gets cracked physically or externally, you must change it to a new one. Most people find it difficult to replace a laptop screen; thus, take it to a repair shop. But, following some simple steps, you can do it independently. You can follow the instructions below to replace your laptop screen by yourself.

Step-1

Turn off the laptop and extract the battery. Keep the battery safe, as you will need to put it back.

Step-2

Once the battery is removed, pull out the rubber screws on the screen. Use a screwdriver or safety pin to remove them. Keep the screws in a safe place.

Step-3

Now take a screwdriver and remove the bezel screws one at a time. There are usually 4 or 8 bezels.

Step-4

By using your finger, detach the bezels from the screen. Place your finger at the bottom of the center of the laptop screen. Don’t force it, do it gently.

Step-5

In this stage, disconnect the cables that are connected to the screen. Usually, there is a video cable, a long ribbon cable connected to the back of the screen. Unplug it from the back of the screen and then remove the power cable on the back of the screen.

Step-6

As the cables and bezels are removed, it is time to remove the damaged laptop screen.

Step-7

Once the old screen is removed, place the new one in the metal frame. Make sure that it has been appropriately placed into the frame.

Step- 8

Reconnect the video and power cables to the back of the new screen. Check that the cables are correctly connected. Otherwise, it won’t work.

Step-9

Before you screw on the screen, put the battery back and turn it on to inspect if it works or not. If it works, put the bezel screw in, and tighten them with a screwdriver.

So, that’s the procedure of changing a laptop screen that can be done by yourself with ease.

How Much Does It Cost To Replace a Laptop Screen

The cost of changing a laptop screen depends on several factors, such as laptop brand and model, screen size, panel type, availability, and so on. Replacing the laptop screen with a professional one will cost more than a casual repairer.

If you want to repair or change your laptop screen with a professional one, you must spend around 300 bucks. It is possible to cut the cost by 50-100 bucks if you do it yourself.

All you have to do is take a new screen, depending on your laptop’s model and size. Remove the old screen, place the new one on the frame, and then check if it is ok. That’s it.

Final Verdict

So, it was all about how to fix a broken laptop screen. We have demonstrated how to repair the laptop if the damage is internal. Besides, it has also been mentioned how you can change the damage repair screen if it is physical or external damage. Hopefully, after reading the write-up, you can repair your laptop screen. You don’t need to go to the professionals anymore, which will save you money.