11.07.2015 Views

T u b e s e a l e r s y s t e m s - Duygu Ticaret

T u b e s e a l e r s y s t e m s - Duygu Ticaret

T u b e s e a l e r s y s t e m s - Duygu Ticaret

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

SYSTEMT u b e s e a l e r s y s t e m sMobile tube sealer battery powered Light, about 1 kg Powerfull, 500 sealing procedureses Certified to work with needle still connected to the patient Supplied with a shoulder bagHEMOWELD-B is supplied together witha comfortable shoulder bag. It is portableand equipped with a powerful rechargeablebattery pack.It can be used to seal most of standardtubing available on the market. It is easyto use and to clean and thanks to itslow power consumption it permits morethen 500 procedures with fully chargedbattery. Each seal it appears with acentral line to facilitate the snap-apartseparation of the two parts.A anti-spark and overheat protectionsystems to avoid damage to the systemand tubing it is included as standard.A beep and LED signals indicate thepresence of sparks while sealing,electrodes dirty or battery low.The sealer is certified as CF Class forthe Electrical Safety Standards and itcan be used with patient/donor stillconnected to the needle.TECHNICAL DATADescription:Mobile tube sealerTrade name:Hemoweld-BSales code:HWELD-B.DB.00Manufacturer:DELCON s.r.l. - Arcore (MI) ItalyEEC Classificationas for MDD 93/42 EEC: Class 1 - Medical deviceReference standards: EN60601-1 for electrical safety, EN60601 for EMCClass of protection: Internal powered equipmentType:CFTHREE ELEMENTS FORM HEMOWELD-B:Radio frequency GeneratorDimensions [mm]: 107W x 42H x 161DWeight:1 KgRF output:80 Watts maximum effectCapacity:more then 500 sealing procedures with fully charged batteries andwith standard tubingWorking frequency: 40.680 MHzEnvironment of use: Temperature 10° ÷ 40°Humidity 10 ÷ 90% RH without condensationBatteries:24 VDC NiCdBattery ChargerDimensions [mm]: 77W x 68H x 120DWeight:280 gCurrent consumption: 700 mAClass of protection: 2Power supply:100-240 Vac 47/63HzRecharging time: less then two hoursDimensions [mm]:Net weight:Fine for sealing of:Cable:Sealing Hand gun26W x 86H x 200D230 gstandard PVC tubing medical grade from 2.7 to 5.0 mm O.D. max2 meter long Hemoweld-B with its transport hand bag


Automatic bench top sealer for PVC tubing For heavy duty job Automatic clamp Self adjusting RF energy Optional hand gun for best flexibility ility of useThis sealer is designed for bench useand for heavy duty job. The sealingclamp automatically closes once thetube is inserted inside by producing aseal in about 1.5 seconds.The protection cap of the clamp it iseasy to remove and it is washable.HEMOWELD-T can be used to seal mostof standard PVC tubing available on themarket. It is easy to use and to cleanand it has a high working capacity.Each seal appears with a central line tofacilitate the snap-apart separation ofthe two parts: sterility of internal bloodcomponents is maintained as well.A anti-spark and overheat protectionsystems to avoid damage to the systemand tubing it is included as standard.A beep and LED signals indicate thepresence of sparks while sealing,electrodes dirty or system over heating.A separate hand gun is available as anoption to improve the flexibility of work.TECHNICAL DATADescription:Trade name:Sales code:Manufacturer:EEC Classificationas for MDD 93/42 EEC:Reference Standards:Bench electronic sealer for medical grade PVC tubing up to 5 mm O.D.Hemoweld-THWELD-T.DB.00DELCON s.r.l. - Arcore (MI) ItalyClass 1 - Medical deviceEN 60601-1 for Electrical Safety, EN 60601-1-2 for EMCDimensions [mm]: 220W x 120H x 200DWeight:about 4 KgRF output:80 WattsWorking frequency: 40.680 MHz.Class of Protection: 1Type:BEnvironment of use: Temperature 10° ÷ 40°Humidity 10 ÷ 90% RH without condensationPower voltage: 115 / 230 V +/-10% a 50/60HzEnergy consumption: 420VAExternal fuses: 2 x 4ATInternal fuse:1 x 160mAT1 x 10AT Optional accessories:HWELD-B.DB.20Sealing hand gun for 3 x 4.0 to 3 x 5.0 mm tubingsupplied with 2 meters cable


T u b e s e a l e r s y s t e m sAutomatic bench sealer for segments preparation Unique system with four clamps Each clamp can be enabled ed or disabled Four segments same length prepared in few seconds Self adjusting RF energy Optional hand gun for best flexibility of useHEMOWELD- MC is designed to rapidlyprepare up to four segments of PVC tubing.Each segment has a standard uniform lengthof 75 mm, enough to include any printedcode with sufficient volume to perform anytesting. The tubing is loaded inside a movingcarousel and once in correctly in place thesealing process start automatically insequence. The whole cycle with all four clampsenabled it last about 7 seconds. The Operatorcan chose if use all four clamps or only someat his choice by a programming key.The protection cover of the clamps is easyto remove and it is washable.HEMOWELD-MC can be used to seal mostof standard PVC tubing available on themarket. The sealer is easy to use and toclean and it has a high working capacity.Each seal appears with a central line tofacilitate the snap-apart separation of thetwo parts: sterility of internal bloodcomponents is maintained as well.A anti-spark and overheat protectionsystems to avoid damage to the systemand tubing it is included as standard.A beep and LED signals indicate thepresence of sparks while sealing, electrodesdirty or system over heating.A separate handgun is available as an optionto improve the flexibility of work.TECHNICAL DATADescription:Trade name:Sales code:Manufacturer:EEC Classificationas for MDD 93/42 EEC:Reference Standards:Automatic sealer for segments preparation for PVC tubing up to5 mm O.D, version with four clampsHemoweld-MCHWELD-MC.DB.00DELCON s.r.l. - Arcore (MI) ItalyClass 1 - Medical deviceEN 60601-1 for Electrical Safety, EN 60601-1-2 for EMCDimensions [mm]: 320W x 120H x 220DWeight:about 6 KgRF output:80 WattsWorking frequency: 40.680 MHz.Class of Protection: 1Type:BEnvironment of use: Temperature 10° ÷ 40°Humidity 10 ÷ 90% RH without condensationPower voltage: 115 / 230 V +/-10% a 50/60HzEnergy consumption: 550VAExternal fuses: 2 x 4ATInternal fuse:1 x 160mAT1 x 16ATThe specification can be changed without noticed - Rev. 1 - 2007Optional accessories:HWELD-B.DB.20 Sealing hand gun for 3 x 4.0 to3 x 5.0 mm tubing supplied with2 meters cable®www.delcon.itDELCON srl - 20043 Arcore (MI) - Italy - Via Matteucci, 25/27 - Phone +39 039.617670 - Fax +39 039.617677 - e-mail: info@delcon.it

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!