How to Electroplate Household Metals

Co-authored by Bess Ruff, MA

Last Updated: April 11, 2024 Fact Checked

Electroplating is a process used to coat one metal with that of a separate metal. There are many objects in our everyday lives that have been plated with other metals: gold-plated jewelry, nickel and copper plated coins, etc. The process involves passing an electric current through a solution of electrolytes that allows for the transfer of metal ions from the donor metal to the recipient metal.^{[1]
X
Research source} You can easily setup a simple apparatus at home to electroplate your own metals.

Method 1

Method 1 of 2:

Electroplating with Muriatic Acid

Download Article

1
Gather the necessary materials. To setup this system, you will need water, muriatic acid, a 6-volt DC lantern battery, two alligator clips, a piece of copper metal, the metallic item you are trying to plate, and a container large enough for the metal you want to electroplate to be submerged. All of these items can be found at a local hardware or home improvement store.
- The 6-volt battery has two prongs that make it easier to connect to the system, but you can use a battery of lower voltage.
- Alligator clips are insulated electrical wires that have metal clips as the ends used for connecting circuits together.
- The piece of copper is the source of ions that will be used to plate your metal item.
- Steel and nickel are two metals that can easily be plated with copper.
When electroplating metals, you are dealing with acids and other chemicals that you need to be protected from. Wear protective eye goggles, gloves, and a lab coat or clothes that you don’t mind ruining if something splashes.

Advertisement
3
Scrub the metal surface clean. To get an even electroplated coat, you must first clean the surface of your metal object. Dirt and oils on the surface can prevent the donor metal from coating the surface. Start with a degreaser such as a detergent (dish soap) and then scrub the metal with an abrasive, acidic cleaner to ensure the surface is very clean.^{[2]
X
Research source}
- A mixture of vinegar and baking soda can be used as an acidic cleaner to scrub the surface clean.
4
Measure 5 parts water. To make the electroplating solution you will mix 5 parts water with 1 part muriatic acid. Never add water directly to acid! Adding water to acid causes an exothermic reaction that can lead to the acid exploding and be very harmful. You want to fill a container large enough to submerge both pieces of metal that will be used for the electroplating process. Start with 5 cups of water and add more as necessary.^{[3]
X
Research source}
- Always maintain the ratio of 5:1. For example, if you need more than 5 cups, measure out 10 cups of water and add 2 cups of muriatic acid.
5
Add 1 part muriatic acid to the water. To avoid injury, remember to always add the acid to the water. If you’ve measured out 5 cups of water, measure out 1 cup of acid and slowly add it to the water while stirring.^{[4]
X
Research source}
- Remember to keep the ratio of 5:1 water to acid.
- The outside of the container will be warm because adding acid to water is exothermic (it creates heat).
- Stir with a glass or plastic stirrer because the acid will degrade a metal.
6
Connect one alligator clip to each prong of the battery supply. The battery will serve to produce the current necessary for the electroplating process. Attach one clip to one prong and the second clip to the second prong of the battery.
- At this stage, it doesn’t matter which clip is connected to which terminal, just that a separate clip is attached to each one.
7
Connect the copper to the positive terminal of the battery. Using an alligator clip, attach the positive terminal of the battery to the piece of copper. If you clip the copper piece to the wrong terminal, the electroplating will not work.^{[5]
X
Research source}
- On a standard 6-volt battery, the positive terminal is the male side of the battery.
8
Connect the metal piece to be plated to the negative terminal of the battery. Take the clip attached to the negative terminal of the battery and attach it to the metal you are trying to plate. Clip the pieces in the least conspicuous way possible. If there is no out-of-the-way place to attach the clip, you will need to alter its location during the plating process so the piece of metal gets evenly coated.^{[6]
X
Research source}
- The negative side of a standard 6-volt battery is the female component.
- If you attach the positive clip to the metal, the electroplating will not work. Double check that you have the correct terminals attached.
9
Submerge both metals into the diluted muriatic acid bath. Once everything is connected, you can place both metal pieces into the bath. The copper piece doesn’t have to be fully submerged, but the piece you are plating does.
- Stir the solution during the plating process to get an even coat.
- Keep the two metal pieces at least an inch apart from each other to avoid getting burn spots where the copper accumulates too quickly.
10
Remove metal piece when you are satisfied with the coat. Using this method makes it a little more difficult to get a thick coat of copper, but you will be able to get a thin, even coat. When are you are satisfied with the look of the metal you were trying to plate, you can remove the metal from the bath and place it on a towel to dry.
- The plating can take anywhere from a few minutes to a few hours.
- If you have more metals to plate, you can connect the next metal to the clip, place it in the acid bath, and stir to coat.

Method 2

Method 2 of 2:

Electroplating with a Metal Ion Electrolyte Solution

Download Article

1
Gather the necessary materials. To electroplate with this method, you will need a piece of copper, the metal to be plated, vinegar, hydrogen peroxide, alligator clips, a 6-volt lantern battery, a glass/plastic container, and gloves. All of these items can be purchased at a local hardware or home improvement store.
- A cheap and easy way to obtain 100% copper is to use a copper scrubbing sponge that can be found in the cleaning aisle of the supermarket.
- Alligator clips are electrical wires that have metal clips on each end used for connecting circuits.
- You can use a battery with a voltage as low as 1.5 volts if you don’t have a lantern battery.
- Use a container large enough to submerge the metal that you’re trying to plate.
2
Combine and heat equal parts vinegar and hydrogen peroxide. You will need enough of this solution to submerge your to-be-plated metal. To make four cups of solution, add two cups of vinegar to two cups of hydrogen peroxide.^{[7]
X
Research source}
- Combining vinegar and hydrogen peroxide makes peracetic acid which must be handled with caution.^{[8]
  X
  Trustworthy Source
  
  Science Direct
  Online archive of peer-reviewed research on scientific, technical and medical topics
  
  Go to source}
3
Soak half of the copper scrubbing pad in the vinegar-peroxide solution. The solution will turn blue, indicating that the scrub has dissolved into the solution. You now have a copper ion solution that can be used for electroplating.^{[9]
X
Research source}
- Wear gloves from this step on because the copper solution is toxic.
- Soak the copper until the solution turns a light blue. It is better for the solution to be of weak concentration, so remove the copper scrub before the solution gets too dark.
4
Attach one end of each alligator clip to the terminals of the battery. The battery provides the current necessary to transport the metals from the donor to the recipient. Connect one alligator clip to the positive terminal of the battery and another alligator clip to the negative terminal.
- At this stage, it doesn’t matter which clip is connected to which terminal, as long as there is a separate clip attached to each one.
5
Clean the metal to be electroplated. Before starting the electroplating method, you must ensure that the metal is clean so the new metal atoms can form a solid bond to the recipient metal.^{[10]
X
Research source} Wear gloves to both protect your hands and keep the metal surface clean. It is essential to do this step well for an even electroplate.
- Clean the grease with a mild detergent such as dish soap.
- Scrub the metal surface with an acidic, abrasive cleaner. A 50-50 vinegar and baking soda solution works well to clean copper.^{[11]
  X
  Research source}
- Rinse the surface well to remove any residue and pat dry with a paper towel.
- From this point on, handle the metal only with gloves on to avoid contaminating the surface.
Take the other half of the copper scrub that wasn’t used to make the solution. Attach the alligator clip connected to the positive terminal of the battery and connect it to the copper scrub. If you attach it to the negative terminal, the electroplating won’t work.^{[12]
X
Research source}
7
Connect the negative alligator clip to the to-be-plated metal. The other clip should be connected to the negative terminal of the battery. Attach this clip to the metal that you are plating. Try to attach it in a place that is inconspicuous.
- You may need to move the clip during the plating process, so you get an even coat.
- If you attach the metal to be plated to the positive terminal, the electroplating won’t work. Simply switch the clips and the process will work.
8
Submerge the metals in the blue copper solution. Once both metals have been connected, submerge them in the blue copper solution you already made. Because they are connected to the battery, a current is flowing through the circuit. Atoms of copper will transfer from the copper metal and bond with the metal you are plating to form a coat.^{[13]
X
Research source}
- To avoid burn spots (spots where the copper accumulates too quickly), keep the two metals at least one inch apart and keep the solution in constant motion.
9
Remove the metal when the coat is even. When you are satisfied with the look of the plating on your metal, remove it from the solution. You can take it out of the solution and check the coat, then replace it in the solution without disrupting the process.
- Rinse the metal and set on a towel to dry.

Community Q&A

Search

Add New Question

Question

Can I use a copper electroplate on semiprecious gemstones and glass to make jewelry?

Paul S

Community Answer

You cannot directly electroplate the gemstones themselves, but the jewelry they are mounted on can be plated. It is best to plate the jewelry without the gemstones, then mount the stones in the plated material.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 8
Question

Can I use nickels for a donor metal to nickel plate items?

Community Answer

No, nickels are not pure nickel, they are a alloy. I think Amazon sells pure nickel strips.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 10
Question

Is electroplating with muriatic acid easier than plating with a metal ion electrolyte?

Paul S

Community Answer

No, since extreme caution must be used, along with personal protection such as gloves, goggles, and apron. Good ventilation of the area you are working in is also very important. The used acid will also be hazardous.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 5 Helpful 8

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

The bottom of a plastic milk jug works well as a container.

Thanks
Helpful 2 Not Helpful 0
It doesn't matter if your host metal is already plated, but it is easier to see the copper plating process, if your metal is a different color.

Thanks
Helpful 2 Not Helpful 1
It doesn't matter if you are using distilled vinegar or not.

Thanks
Helpful 2 Not Helpful 1

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Wash your hands after handling electrolyte solution, which may cause irritation to eyes and skin if not rinsed off immediately.

Thanks
Helpful 1 Not Helpful 0