OPTICAL FIBER COMMUNICATION PPT

OPTICAL FIBER COMMUNICATION
Presented By -
SATYENDRA VISHWAKARMA
M.TECH(Electrical Power & Energy Systems)
Dept. Of Electrical & Electronics Engineering
Ajay Kumar Garg Engineering College, Ghaziabad, U.P.

OUTLINE OF PRESENTATION
 INTRODUCTION
 PRINCIPLE OF LIGHT PROPAGATION THROUGH A FIBRE
 CONDITIONS TO ACHIEVE TOTAL INTERNAL
REFLECTION
 DIFFERENT TYPES OF FIBRES AND THEIR PROPERTIES
 GENERAL OVERVIEW OF OPTICAL FIBER
COMMUNICATION SYSTEM
 PRIMARY ELEMENTS OF OPTICAL FIBER
 BENEFITS OF OPTICAL FIBER COMMUNICATION SYSTEM
 APPLICATION
 CONCLUSION
 REFERENCES

INTRODUCTION
 Fiber-optic communication is a method of transmitting information
from one place to another by sending pulses of light through
an optical fiber. The light forms an electromagnetic carrier wave that
is modulated to carry information.
 Optical Fibre -
An optical fibre is a dielectric wave guide that operates at optical
frequencies. This fibre wave guide is normally cylindrical in form.
 Function -
It confines electro magnetic energy in the form of light to within its
surfaces and guides the light in a direction parallel to its axis.

PRINCIPLE OF LIGHT PROPAGATION
THROUGH A FIBRE
 When the light ray is incident on the interface between two medium
having different indices at an angle greater than critical angle, the
light gets totally internally reflected within the medium of higher
refractive index.

 Refractive Index –
The refractive index of a medium is defined as the ratio of velocity
of light in vacuum to the velocity of light in the medium.

3. If the dielectric on other side of interface has the refractive index n2
which is less than n1 , then the refraction is such that the ray path in
this index medium is at an angle Φ2 to the normal where Φ2>Φ1 .
4. The angle of incidence Φ1 and the refraction Φ2 are related to each
other and to the refractive indices of dielectric by Snell’s law of
refraction which states that
n1sinΦ1= n2sinΦ2
5. When the angle of refraction is 90° and the refracted ray emerges
parallel to the interface between the dielectrics, the angle of incidence
must be less than 90°.

CONDITIONS TO ACHIEVE TOTAL
INTERNAL REFLECTION
The phenomenon of total internal reflection occurs at the interface
between two dielectrics of different refractive indices only when,
 Light is incident on the dielectric of lower index from the dielectric
of higher index.
 The angle of incidence exceeds the critical value.

DIFFERENT TYPES OF FIBRES AND
THEIR PROPERTIES
 Based on fibers used in communication they are classified
into:
1. Step index fiber
a. Single mode
b. Multimode
2. Graded index fiber
a. Multimode

1. Step Index Fibre-
The refractive index of core is maximum and constant
throughput the core.
There is a stepwise decrease of refractive index in
cladding.
The refractive index of cladding is given by,

Step index multimode fiber
The difference between refractive indices of core and cladding
is more.
Its core has large diameter.
It is used in short distance communication because attenuation
is large.

Step index single mode fiber
The difference between refractive indices of core and cladding
is very less.
Its core diameter is also very small.
It has low attenuation and very high bandwidth.
It has low numerical aperture(NA). So these are used in long
distance communication.

2. Graded Index Fibre-
The refractive index of core varies parabolically such that its
maximum at the core axis and minimum at the core cladding
boundary.
The refractive index of a graded index fiber is given by,

GENERAL OVERVIEW OF OPTICAL FIBER
Like all other communication system, the primary objective of optical
fiber communication system also is to transfer the signal containing
information (voice, data, video) from the source to the destination. The
general block diagram of optical fiber communication system is shown
in the figure.

PRIMARY ELEMENTS OF OPTICAL FIBER

BENEFITS OF OPTICAL FIBER
Some of the innumerable benefits of optical fiber communication
system are:
 Immense bandwidth to utilize
 Total electrical isolation in the transmission medium
 Very low transmission loss
 Small size and light weight
 High signal security
 Immunity to interference and crosstalk
 Very low power consumption and wide scope of system expansion
etc.

APPLICATION
Due to its variety of advantages optical fiber communication system
has a wide range of application in different fields namely:
 Public network field which includes trunk networks, junction
networks, local access networks, submerged systems, synchronous
systems etc.
 Field of military applications
 Civil, consumer and industrial applications
 Field of computers which is the center of research right now.

CONCLUSION
Though there are some negatives of optical fiber
communication system in terms of fragility, splicing,
coupling, set up expense etc. but it is an un avoidable fact that
optical fiber has revolutionized the field of communication.
As soon as computers will be capable of processing optical
signals, the total arena of communication will be opticalized
immediately.

REFERENCES
[1] K. C. Kao and G. A. Hockham, Proc. IEE 113, 1151
(1966); A. Werts, Onde Electr. 45,967 (1966).
[2] N. S. Kapany, Fiber Optics: Principles and Applications,
Academic Press, San Diego, CA,1967.
[3] J. Gower, Optical Communication Systems, 2nd ed.,
Prentice Hall, London

OPTICAL FIBER COMMUNICATION PPT

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (20)

Similar to OPTICAL FIBER COMMUNICATION PPT

Similar to OPTICAL FIBER COMMUNICATION PPT (20)

Recently uploaded

Recently uploaded (20)

OPTICAL FIBER COMMUNICATION PPT