Introduction
Use this guide to remove and replace the vibrator in the Nokia 6010.
What you need
-
-
Press the small tab on the bottom of the back of the phone.
-
Push the back case upward towards the power button. The back case will then pop off.
-
-
-
With one hand, press the ridged tab near the visible side of the SIM card.
-
Slide the card out with your other hand.
-
-
-
Grip the phone on either the sides, the top, or the bottom.
-
Pull the front case away from the rest of the phone.
-
-
-
-
Remove the six screws around the front of the phone body with a T6 screwdriver.
-
-
-
Insert a spudger beneath the metallic shaft of the vibrator and pry it away from the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.