Mobile Communication The Mobile Station (MS) is the user equipment in GSM. The MS is what the user can see of the GSM system, the cellular phone itself.

Presentation on theme: "Mobile Communication The Mobile Station (MS) is the user equipment in GSM. The MS is what the user can see of the GSM system, the cellular phone itself."— Presentation transcript:

1 Mobile Communication The Mobile Station (MS) is the user equipment in GSM. The MS is what the user can see of the GSM system, the cellular phone itself. The MSc in GSM are independent from networks-providers. The identity of the subscriber is obtained from a SIM (Subscriber Identity Module) that has to be inserted into the MS to make it work

2 Mobile Communication The Base Transceiver Station (BTS) is the entity corresponding to one site communicating with the Mobile Stations. Usually, the BTS will have an antenna with several TRXs (radio transceivers) that each communicate on one radio frequency. ……………………. Continued

3 Mobile Communication The link-level signaling on the radio-channels is interpreted in the BTS, whereas most of the higher-level signaling is forwarded to the BSC and MSC. Speech and data-transmissions from the MS is recoded is the BTS from the special encoding used on the radio interface to the standard 64 kbit/s encoding used in telecommunication networks. Like the radio-interface, the Abis interface between the BTS and the BSC is highly standardized who allowing BTSs and BSCs from different manufacturers in one network.

4 Mobile Communication Each Base Station Controller (BSC) controls the magnitude of several hundred BTSs. The BSC takes care of a number of different procedures regarding call setup, location update and handover for each MS.The handover control procedures will come especially into focus in this assignment …………………Continued

5 Mobile Communication It is the BSC that decides when handover is necessary. This is accomplished by analyzing the measurement results that are sent from the MS during a call and ordering the MS to perform handover if this is necessary. The continuous analyzing of measurements from many MSs requires considerable computational power. This put strong constraints on the design of the BSC.

6 Mobile Communication The Mobile Switching Centre is a normal ISDN-switch with extended functionality to handle mobile subscribers. The basic function of the MSC is to switch speech and data connections between BSCs, other MSCs, other GSM-networks and external non- mobile-networks. ………….Continued

7 Mobile Communication The Mobile Switching Centre is a normal ISDN-switch with extended functionality to handle mobile subscribers. The basic function of the MSC is to switch speech and data connections between BSCs, other MSCs, other GSM-networks and external non- mobile-networks. ………….Continued

8 Mobile Communication The MSC also handles a number of functions associated with mobile subscribers, among others registration, location updating and handover. There will normally exist only a few BSCs per MSC, due to the large number of BTSs connected to the BSC. The MSC and BSCs are connected via the highly standardized A-interface. However, due to the lack of standardization on Operation and Management protocols, network providers usually choose BSCs, MSCs and Location Registers from one manufacturer.

9 Mobile Communication With each MSC, there is associated a Visitors Location Register (VLR). The VLR can be associated with one or several MSCs. The VLR stores data about all customers who are roaming with in the location area of that MSC. This data is updated with the location update procedure initiated from the MS through the MSC, or directly from the subscriber Home Location Register (HLR).

10 Mobile Communication The HLR is the home location register of the subscriber. Subscription information, allowed services, authentication information and localization of the subscriber are at all times stored in the HLR. This information may be obtained by the VLR/MSC when necessary. When the subscriber roams into the location area of another VLR/MSC, the HLR is updated

11 Mobile Communication The Equipment Identity Register (EIR) is an optional register. Its purpose is to register IMEIs of mobile stations in use. By implementing the EIR the network provider can blacklist malfunctioning MSs or even receive reports to the operations centre when stolen mobile stations are used to make calls.

12 Mobile Communication Authentication center database (AuC) – used for authentication activities, holds encryption keys

13 Mobile Communication Authentication center database (AuC) – used for authentication activities, holds encryption keys

14 Mobile Communication In GSM it is distinguished between cells and location areas. A cell is defined as the area in which one can communicate with a certain base station. In other words, the cell is related to the BTS. When not communicating, the MS does not need to actively announce a shift from one cell to another. If the MS is engaged in communication, a handover must be performed in order to change from one cell to another. Figure: A possible cell configuration. Figure shows a possible cell configuration within one location area. The use of a number of small cells within one large operating on different frequencies is typical. The small cells will take the majority of the traffic, while the large cell will cover all the “holes' between the small cells. Different cell-types can be classified according to their coverage dimension.

15 Mobile Communication In GSM it is distinguished between cells and location areas. A cell is defined as the area in which one can communicate with a certain base station. In other words, the cell is related to the BTS. When not communicating, the MS does not need to actively announce a shift from one cell to another. If the MS is engaged in communication, a handover must be performed in order to change from one cell to another. Figure: A possible cell configuration. Figure shows a possible cell configuration within one location area. The use of a number of small cells within one large operating on different frequencies is typical. The small cells will take the majority of the traffic, while the large cell will cover all the “holes' between the small cells. Different cell-types can be classified according to their coverage dimension. Table: Different cell-types Cell typeAntenna locationCell Dimension (km) Large macro CellAbove rooftop level3-30 Small macro CellAbove rooftop level1-3 Micro CellBelow or about rooftop level0.1-1 Pico CellBelow rooftop level0.01-1 Nano CellBelow rooftop level0.01-0.001