A potter can never have too many sponges, and when I saw Jared Zehmer's genius hack for creating multiple throwing sponges from one big sponge, I knew I had to share it.
In this Quick Tip, excerpted from the Ceramics Monthlyarchive, Jared explains how he creates twelve throwing sponges for only $0.17 each! I know which aisle I'll be browsing the next time I go to the home improvement store. – Jennifer Poellot Harnetty, editor
A handy and economical tip I’ve picked up from my community of potters is how to have a nearly endless supply of inexpensive throwing sponges. Simply cut up an Armaly ProPlus polyurethane sponge—the large, yellow kind found in a hardware store’s grout
and flooring aisle. They’re made of a durable fiber that lasts a surprisingly long time. One sponge, which costs around $2.50 (a contractor pack of 6 costs $12.50), can be cut down to make 12 small throwing sponges ($0.17 each).
The easiest way to cut them is to use a sharp chef’s knife; however, a box cutter or scissors will also work. Using a Sharpie, trace cutting lines onto the sponge, dividing the face into sixths, then mark a horizontal line around the side of the sponge.
The first cuts should be into the face of the sponge to cut out six pieces (1), then each piece can be tilted up to cut it in half horizontally (2).
You will end up with 4 square sponges and 8 with one rounded corner (3). I like having sponges with 90° angles, which can be used to get into hard-to-reach places for cleaning and drying. It’s easy to round off the corners if you prefer round sponges.
As an extra bonus, it’s simple to make your own sponge on a stick using a wooden dowel, a rubber band, and one of your new sponges. Hold one corner of a sponge across the tip of a dowel and repeatedly loop the rubber band around the sponge’s base
(4).
Search the Daily
Published Mar 12, 2024
In this Quick Tip, excerpted from the Ceramics Monthly archive, Jared explains how he creates twelve throwing sponges for only $0.17 each! I know which aisle I'll be browsing the next time I go to the home improvement store. – Jennifer Poellot Harnetty, editor
A handy and economical tip I’ve picked up from my community of potters is how to have a nearly endless supply of inexpensive throwing sponges. Simply cut up an Armaly ProPlus polyurethane sponge—the large, yellow kind found in a hardware store’s grout and flooring aisle. They’re made of a durable fiber that lasts a surprisingly long time. One sponge, which costs around $2.50 (a contractor pack of 6 costs $12.50), can be cut down to make 12 small throwing sponges ($0.17 each).
The easiest way to cut them is to use a sharp chef’s knife; however, a box cutter or scissors will also work. Using a Sharpie, trace cutting lines onto the sponge, dividing the face into sixths, then mark a horizontal line around the side of the sponge. The first cuts should be into the face of the sponge to cut out six pieces (1), then each piece can be tilted up to cut it in half horizontally (2).
You will end up with 4 square sponges and 8 with one rounded corner (3). I like having sponges with 90° angles, which can be used to get into hard-to-reach places for cleaning and drying. It’s easy to round off the corners if you prefer round sponges.
As an extra bonus, it’s simple to make your own sponge on a stick using a wooden dowel, a rubber band, and one of your new sponges. Hold one corner of a sponge across the tip of a dowel and repeatedly loop the rubber band around the sponge’s base (4).
Interested in making more tools? Check out these articles on how to make sgraffito tools, custom clay rollers, and kanna trimming tools!
**First published in 2019.
Related Content
Ceramic Artists
Functional Pottery
Ceramic Sculpture
Glaze Chemistry
High Fire Glaze Recipes
Mid-Range Glaze Recipes
Low Fire Glaze Recipes
Ceramic Colorants
Ceramic Glazes and Underglazes
Ceramic Raw Materials
Pottery Clay
Ceramic Decorating Tools
Ceramic Kilns
Making Clay Tools
Wheel Throwing Tools
Electric Kiln Firing
Gas Kiln Firing
Raku Firing
Salt Firing and Soda Firing
Wood Kiln Firing
Ceramic Decorating Techniques
Ceramic Glazing Techniques
Handbuilding Techniques
Making Ceramic Molds
Making Ceramic Tile
Wheel Throwing Techniques