Dielectric Mats and Switchboard Mats
Corrugated Switchboard Mats and Switchboard Matting
• A specially compounded switchboard matting is non-conductive corrugated matting designed to help prevent electric shock around high voltage electrical equipment, such as fuse boxes, and control panels.
• Switchboard mats now meet all optional requirements for Ozone Resistance, Flame Resistance, and Oil Resistance.
MIL-DTL-15562 TYPE I (1/8”) SMOOTH TOP
Durable, marbleized, fire-retardant, electrically insulating surface is installed in naval vessels in high-voltage compartments.
The Type I matting offers aesthetics and water-tight integrity with heat welded seams.
-
MIL-DTL-15562 TYPE II (1/8”)
Type II smooth surface is fire-retardant, electrically insulating matting used as a portable runner in front of equipment and on workbenches.
• Dielectric Test Voltage 30,000 VAC
• Proof Tested Over Entire Surface At 15,000 VAC
• Recommended Maximum Use Voltage 3,000 VAC
Diamond Switchboard Mats and Switchboard Matting
• Switchboard Mats Conform to MIL SPEC. MIL-DTL-15562G, Type III.
• This dielectric mat specification is approved for use by all interested Commands of the Department of the Navy and the Marine Corps and is available for use by all other Departments and Agencies of the Department of Defense.
•Mat Dielectric Test Voltage 30,000 VAC
•Switchboard Matting is Proof Tested Over Entire Surface at 15,000 VAC
•Recommended Maximum Use Voltave 3,000 VAC
Dual Purpose Dielectric Mats and Dielectric Anti-Fatigue Matting
• Dielectric anti-fatigue matting is a quarter inch thick, ASTMD-178, corrugated or diamond surfaced switch-board mats laminated to a 3/8" thick, super resilient polymeric sponge base provides employees a comfortable work surface to stand on while providing protection from accidental electrical shock.
• Rhino dielectric switchboard mats conform to OSHA requirements for electrical protective devices with certification engraved on back.
• Rhino Dual-Purpose switchboard anti fatigue matting also meets the optional requirements cited by ASTM for flame resistance, ozone resistance and oil resistance.
Fusebox Safety Mats - Dielectric Safety Matting
• Fusebox Dielectric Safety mats provide a portable platform for personal protection of employees working near exposed energized breakers, fuses or circuit parts.
• Dielectric Saftey mat is 1/4” thick switchboard mat, ASTM D178 Class 2 specification, with a maxium use voltage of 17kv, laminated to a 3/8” thick sponge base.
• Fusebox Safety Mats are manufactured for personal protective equipment and comfort, they should only be used to offer “temporary” electrical insulation for energized equipment.
While remaining true to our roots as craftsmen
Ranco is founded on an equal commitment to technology. Better tools and more precise techniques are essential to the manufacturing of the world's best anti-fatigue mats. Ranco personnel have been at the forefront of innovative mat design for the last twenty years. Ranco has cultivated links to manufacturing and chemical engineering partners throughout the world to further our efforts. The ultimate product of these efforts, there's a little Einstein in every Rhino mat.
